This article will show you how to pair your Westpac VX690 with your POS.
Before proceeding, ensure that the Simple Payment Integration module is installed and enabled on your EFTPOS terminal. Contact your bank (e.g., Westpac) to verify this. If the module is not installed, request assistance from your bank to enable or install it on your device.
Step 1: Connect your Westpac VX690 to the Nomni POS Network
To connect your payment device to a wifi network, follow these steps:
On the Menu, select 3. Communications and press the enter button.
Select 1. Wifi and press enter.
Select your Nomni POS wifi network and press enter.
Use the keypad to enter your wifi password and then click Connect.
Step 2: Retrieve a Pairing Code from your Westpac VX690
Once the payment device has connected to the Nomni POS network, the screen will display the device’s serial number, wifi network, and device IP address.
To retrieve the pairing code, click Pair with POS. The next screen will then display a pairing code. You may be prompted to enter the merchant password before the pairing code is displayed.
Step 3: Retrieve a Pairing Code from your Nomni POS
Go to Settings (admin user privileges are required).
Under the Payment tab, go to Simple Payments Integration on the left-side menu. If you can’t see it, check that the Custom Payments toggle is on.
Tap the Simple Payments Integration button.
Select Westpac Presto and tap Done.
Enter the Device Serial Number and the Device IP Address and turn on Automatic IP Address.
Tap SAVE and then tap PAIR. A pop up window will appear with a pairing code.
Step 4: Confirm that the Pairing Codes Match
Confirm that the pairing code on the iPad matches the code on the payment device.
If the codes match, select Yes on the payment device and YES on your POS.
Step 5: The Westpac VX690 is Paired with the Nomni POS
When the payment device is connected to your POS, the screen will display Connected to ‘NomniPOS’.